VM-2HDCP 12 DVI Distributor Features | Kramer Electronics specs

Table 1: VM-2HDCP 1:2 DVI Distributor Features

#	Feature	Function
1	12V DC	+12V DC connector for powering the unit
2	OUTPUT1 DVI Connector	Connect to the DVI acceptor 1
3	OUTPUT2 DVI Connector	Connect to the DVI acceptor 2
4	INPUT DVI Connector	Connects to the DVI source
5	INPUT LED	Lights when the input is active; blinks when the input is not valid
6	OUT 1 LED	LED lights when OUTPUT 1 is connected and active; LED blinks
		when selecting the EDID (see section 5.1)
7	OUT 2 LED	LED lights when OUTPUT 2 is connected and active; LED blinks
		when selecting the EDID (see section 5.1)
8	ON LED	Lights when the unit is powered
9	EDID Button	Press to read the EDID of the selected display (see section 5.1)

To connect the VM-2HDCPas illustrated in the example in Figure 4, do the following:

1.Connect a DVI source (for example, a host computer) to the INPUT connector.

2.Connect the OUTPUT connectors1 to one or both DVI acceptors, as follows:

OUTPUT 1 connector to DVI acceptor 1 (for example, a projector)

OUTPUT 2 connector to DVI acceptor 2 (for example, a display)

3.Connect the 12V DC power adapter (wall transformer) to the 12V DC socket and connect the transformer to the mains electricity.

4.Acquire the EDID (see section 5.1).

1 Both outputs do not need to be connected

6	KRAMER: SIMPLE CREATIVE TECHNOLOGY