Contents
Installation | 1 |
Button Description | 4 |
General Operation | 5 |
Menu Selection Function | 6 |
Radio Operation | 6 |
CD Operation | 7 |
MP3/WMA Operation | 8 |
Installation
Headunit Installation
Before installing the unit, please remove the two transit screws.
Note: When installing this unit on a vessel, use the two pieces of plastic film (supplied with the unit) to seal the two holes after removing the screws.
Mounting Hole Dimensions 180mmW x 178mmD x 50mmH
001 INSTALLATION
iPod® Operation | 9 |
USB Operation | 10 |
Supported MP3/WMA Formats | 10 |
CAUTION:
FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS MUST BE MOUNTED WITHIN 20' OF HORIZONTAL. MAKE SURE THE UNIT IS MOUNTED WITHIN THIS LIMITATION.
|
|
| 20' MAX |
SIDE VIEW |
|
|
|
|
|
| |
OF |
|
| FRONT PANEL |
|
| ||
CHASSIS |
|
| |
|
|
|
|
NUT(5MM)
PERFORATED STRAP
BEND TOP 
TABS UPWARD
Technical Specifications | 12 |
Tuning Range | 12 |
Notes | 13 |
RECORD YOUR PRODUCT DETAILS HERE:
MODEL NUMBER |
| DATE OF PURCHASE |
|
AFFIX RECEIPT HERE
Version 1.0
FASTEN THIS END TO SCREW STUD ON
REAR OF CHASSIS
BEND BOTTOM TABS
DOWNWARD
SCREW (5MM)
SCREW STUD
NUT(5MM)
MOUNTING SLEEVE
FASTEN THIS END TO A SECURE LOCATION.
DRIL HOLE IF NECESSARY.
DETACHABLE
FRONT PANEL
Insert the sleeve into the mounting hole and select the appropriate tabs to secure it firmly by bending them into position.
Use the supplied strap to support the rear of the unit.