004 BUTTONDESCRIPTION | Button Description |
|
|
|
|
| ||||
16 | 17 | 18 | 15 | 10 | 11 | 12 | 13 | 14 | ||
| ||||||||||
19 | 20 | 21 | 22 | 23 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| 8 | 9 |
|
|
|
|
|
|
|
| 24 |
|
|
| 25 | 26 |
|
General Operation
POWER ON/OFF
Press the power ON/OFF button (16)
FRONT PANEL RELEASE
Press OPEN button (8) to open the front panel
SOUND ADJUSTMENT
Press the SEL/MENU button (17) repeatedly to cycle the audio mode through bass, treble, balance and fader modes. Press the VOLUME UP button or VOLUME DOWN button to adjust the selected mode.
Bass 
Treble 
Balance 
Fader
SETTING THE CLOCK | EQUALIZATION |
005 GENERAL OPERATION
1. | / Play/Pause | 15. | LCD Screen |
2. | SCN (track preview) | 16. | Power ON/OFF |
3. | RPT (Repeat) | 17. | SEL/MENU |
4. | SHF (Shuffle) | 18. | Volume Up + |
5. | DIR - | 19. | Rewind |
6. | DIR + | 20. | Volume Down - |
7. | DISPLAY | 21. | Forward |
8. | OPEN | 22. | USB/AUX 3.5mm Socket Interface |
9. | MON | 23. | AS/PS - Auto store preset scan |
10. | BND/LOU/ENT |
| iPod Menu |
11. | MODE/Sub Woofer | 24. | Preset Station Buttons |
12. | EQ (Equaliser) | 25. | Disc Slot |
13. | Mute | 26. | Reset button |
14.
(Eject)
Press the DISPLAY button once to switch to display clock, then press and hold the DISPLAY Button until the clock is
displayed and flashes. Press the | button to change the | |
minutes and the | button to change the hours. Press | |
DISPLAY button to confirm and exit. |
| |
MUTE
Press MUTE button to mute the sound. Press again to resume.
LOUDNESS
Press and hold the BND/LOU/ENT button (10) to reinforce the bass output. Press again to cancel.
MODE SELECTION
Press the MODE/SW button to cycle through the source modes. Only active modes will be displayed. Eg. If there is no CD loaded CD mode will not be selectable.
SUBWOOFER LINE OUT
Press and hold MODE/SW button (11) to activate the Subwoofer output. Repeat to deactivate
Press the EQ button repeatedly to cycle through and select the EQ option you desire.
ESP
Electronic shock protection provides a 10 second read ahead buffer.
RESET BUTTON
The RESET button is located in the housing of the unit button (26) and must be activated with a ballpoint pen or something similar under the following conditions.
1.An error symbol is displayed
2.Function buttons do not operate correctly