006 MENU SELECTION
Menu Selection Function
Press and hold SEL button (17) to enter Menu Select Mode. Press the VOLUME UP button (18) or the VOLUME DOWN button (20) to adjust the BEEP function.
BEEP 2nd MODE
Only beeps on press and hold functions.
BEEP ALL
Beeps on all key presses.
BEEP OFF
Beeps disabled.
If there is no CD loaded press OPEN Button (8) and gently insert the disc until you feel some resistance. The CD will be drawn into the unit and playback will begin.
If there is a CD already in the unit press the MODE button (11) until CD mode is displayed.
EJECTING A DISC
Press the OPEN button (8) and press the EJECT button (14). | Press again to cancel. |
PAUSE PLAY | SHUFFLE |
Press PAUSE/PLAY button (1) to pause play, press again to | Press the SHF button (4) to play the tracks in a random |
resume. | order. Press again to cancel. |
TRACK SELECTION | SCAN TRACKS |
007 CD OPERATION
Radio Operation
Press the MODE button (11) to select the Radio mode.
SELECTING FREQUENCY BAND
Press BND/LOU/ENT button (10) to cycle through and select the desired band
FM 1 | FM 2 | FM 3 | AM/MW |
Press the button (19) to skip to the previous track or Button (21) to skip to the next track.
Press and hold (21) to FAST FORWARD and (19) to FAST REWIND. 
REPEAT TRACK
Press RPT button (3) to continuously repeat the track.
Press SCN button (2) to play a few seconds of each track. Press again to cancel and continue playing the track.
SELECTING STATION
Auto Seek |
|
|
Press the | button (19) or | button (21) to activate |
the automatic seek function up or down the frequency
spectrum. |
|
|
Manual |
|
|
Press and hold the | button (19) or the | button (21) |
until MANUAL appears on the screen. If neither button is pressed for several seconds the unit will switch to AUTO SEEK.
There are six presets available for each band (FM1, FM2, FM3 and AM).
1.Select the desired band and tune in the station you want to store.
2.Press and hold the PRESET button (24)
number is displayed.
MONO/STEREO
Press MON button (9) to select Mono or Stereo mode.
AUTOMATIC MEMORY STORING AND PRESET SCAN
Automatic Memory Storing
Press and hold the AS/PS button (23) and the unit will search for the strongest signals and then store them in the presets.
Preset Scan
Press the AS/PS button (23) to preview all stored preset stations. Stations with weak signal levels are bypassed.
STORING PRESET STATIONS
TUNER REGION SETUP
To change the tuner region between Europe (EUR) and USA (default is Europe),
1.Press and hold SEL/MENU button (17) until region displayed.
2.Then press VOL + (18) or VOL - (20) buttons to cycle.