3-3. MOTOR BLOCK
1Turn the cam (L) and position the cam so that part A does not touch the SWITCH board SW900.
4 PTT 2.6x6
CDX-M620/M670
3 PTT 2.6x6
2 motor block
SWITCH board
5PTT 2.6x6
SW1001
SW1002
cam (L)
A
3-4. ALIGNMENT BETWEEN ARM (A-L) ASSY AND ARM (B-L) ASSY
1Input 9V DC to the motor terminal until the cam (L) stops rotating.
Take care to avoid overload of the motor.
2Verify that the arm
motor
arm
arm
+B
DC 9V
GND
23