Harman-Kardon Car Stereo System owner manual Wiring Diagram, Audio Input/Output Jacks

Wiring Diagram

iPod

Text Display

Control Knob

iPod Cable

Audio Input/Output Jacks

Tip = LEFT

RIGHT = Ring

Sleeve = GROUND

3.5mm Stereo

Mini-Plug Cable

Electronics Enclosure

Side Back

or

12-Volt Power

3.5mm Stereo CableHarness (not included)

Third-Party CD Changer Interface (optional)

Auxiliary

Device

(optional)

Cell Phone,

Satellite Radio, etc.

2A Fuse

+12Vdc = yellow ACC = red GND = black

Wired

FM Adaptor

(optional)

12-Volt Accessory Power Cable

Antenna Cable (disconnect from Head Unit/Radio)

Direct Connection of the 12-Volt Power Harness With In-Line Fuse Holder

Use this method when you want a permanent power connec- tion to the vehicle. Also, by connecting the harness’s red wire to the ignition switch’s ACC terminal, Drive + Play will turn on

or off with the vehicle’s ignition (ACC) switch. An in-line fuse holder provides protection for the unit.

IMPORTANT: Replace the in-line fuse only with one of the same type and rating.