Hifionics HS800.4, HS300.4 manual Samson Amplifiers, HS1500.1D / HS2500.1D Mono Block Amplifiers

Page 4

AMPLIFIER FEATURE DESCRIPTIONS

SAMSON AMPLIFIERS:

-Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged operation except the mono amps which are capable of 4, 2 and 1-Ohm loads.

-The input sensitivities for rated output powers are variable from 0.2 volts to 6 volts.

-All crossovers are fully variable in their respective ranges.

-Crossover filters are 12dB/Octave.

-A POWER LED indicates the powered up and turned on condition.

-All Hifonics amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “PROTECT” LED.

-CAUTION: DO NOT OPERATE ANY AMPLIFIER BELOW THE INTENDED IMPEDANCE. YOU WILL CAUSE DAMAGE TO THE AMPLIFIER THAT WILL NOT BE COVERED UNDER THE WARRANTY PRINTED IN THE BACK OF THE MANUAL. 2 & 4 Channel amps are capable of 4 and 2-Ohms wired stereo and 4-Ohms wired mono bridged. The mono amps are capable of 4, 2 and 1-Ohm.

The 4 channel amps have the same features as the 2 channel models accept that there are 2 sets of controls.

1 set for channels 1 & 2 and 1 set for channels 3 & 4.

In addition, the 4 channel models have a Mode switch which allows you to select 2, 3 or 4 channel operation. Switch to 2 channel if you only have 1 set of RCA’s in CH 1/2 and the unit will automatically supply signal to channels 3/4. Select 3 channel when you only have RCA’s in CH 1/2 but plan to run channels 3/4 bridged. Select 4 channel if you are providing RCA’s to channels 1/2 and 3/4.

The X-OVER slide switch selects the internal crossover functions:

-The input signal is routed directly to the LINE OUT RCA jacks, regardless of the X-OVER setting simplifying daisy chaining of amplifiers.

-HPF: Selects the built in HIGH PASS filter, variable from 60 Hz to 1.2kHz.

-FULL: Bypasses all crossovers for full frequency range operation.

-LPF: Selects the built in LOW PASS , variable from 30 Hz to 250Hz.

MODE: The mode switch allows you to choose Stereo for full range 2 channel operation or MONO for bridging operation

HIGH INPUT: If your radio/CD player does not have unbalanced (RCA) outputs, you can use the HIGH level (wire) inputs.

LINE INPUT: The line input accepts unbalanced (RCA) inputs from 0.2V to 6V.

LINE OUTPUT: The line output passes through signal from the line inputs which allows you to daisy chain multiple amplifiers from one signal.

-The LINE INPUT signal is routed directly to the LINE OUT RCA jacks, regardless of the X-OVER setting simplifying daisy chaining of amplifiers.

-SUBSONIC: Allows you to adjust the crossover filter from 15Hz to 55Hz.

-LOW PASS: Allows you to adjust the LOW PASS crossover filter from 40Hz to 150Hz.

LEVEL: Adjusts the input sensitivity from 0.2 volts to 6 volts.

BASS BOOST: The BASS BOOST is adjustable from 0db to 12dB.

REMOTE: This is the input jack for the remote Level control.

LINE INPUT: The line input accepts unbalanced (RCA) inputs from 0.2V to 6V.

LINE OUTPUT: The line output passes through signal from the line inputs which allows you to daisy chain multiple amplifiers from one signal.

HS300.4 / HS500.4 / HS800.4 4-CHANNEL AMPLIFIERS

Note that the LOW PASS signal is MONO.

-In the LPF position, the HIGH PASS filter acts as a subsonic filter.

-When the LPF mode is selected, a 0 to +12dB, at 45Hz, BASS -EQ is also switched in.

HS1500.1D / HS2500.1D MONO BLOCK AMPLIFIERS

The mono amps are capable of 4, 2 & 1-Ohm loads. Operating the amp below 1-Ohm can cause damage to the amp not covered in the warranty.

2

Image 4
Contents Samson Samson High Performance Amplifiers General Installation Procedure WoodSamson Amplifiers HS1500.1D / HS2500.1D Mono Block Amplifiers2CH X-OVER Full 4CH X-OVER Full HI Pass N/A LOW Pass N/A2CH X-OVER Full 4CH X-OVER LPF HI Pass N/AStereo Interconnect RCA Cable 2CH X-OVER HPF 4CH X-OVER HPFRemote TURN-ON HS1500.1D / HS2500.1D Mono Amplifier Application Designated Mono Output From Head UnitPage Setting UP Systems After Installation for Best Performance Bass BoostSubsonic LOW PassTroubleshooting a System Maxxsonics Limited Warranty OEM Integration Accessories PART# A710

HS800.4, HS300.4, HS500.4, HS1500.1D, HS2500.1D specifications

Hifonics, a brand synonymous with powerful and reliable car audio equipment, has made significant contributions to the amplifier market with its HS series. This collection includes five impressive models: the HS2500.1D, HS1500.1D, HS500.4, HS300.4, and HS800.4. Each of these amplifiers is designed to deliver exceptional performance, ensuring that users enjoy their audio experience to the fullest.

The HS2500.1D is a monoblock amplifier that epitomizes power and efficiency with its rugged build and advanced Class D technology. Capable of delivering up to 2500 watts of max power, it enables users to drive even the most demanding subwoofers with ease, ensuring deep bass and clarity. This unit features a low-pass filter, adjustable gain control, and a variable bass boost that allows customization for different audio setups.

The HS1500.1D is another standout monoblock amplifier that brings a potent 1500 watts of max power output. This amplifier is engineered with a highly efficient design, which contributes to minimal heat generation and extended performance. It also comes with a low-pass filter and a bass boost feature, making it versatile for various sound preferences.

For those who need a versatile multi-channel amplifier, the HS500.4 model offers four channels of amplification. With a max power output of 500 watts, it is perfect for powering door speakers and subwoofers in a full sound system. Its high and low-level inputs provide flexibility in installation, allowing users to connect to virtually any audio source.

The HS300.4 is another four-channel amplifier, delivering a maximum output of 300 watts. It shares many of the same features as the HS500.4, including an adjustable low-pass filter, high-pass filter, and bass boost, providing users the ability to build a balanced audio environment tailored to their specific needs.

Finally, the HS800.4 offers a powerful solution with an impressive 800 watts of max power, ideal for anyone looking to maximize their in-car audio system. This amplifier includes features like a variable crossover and multiple speaker outputs, giving users the ability to fine-tune their sound.

All models in the Hifonics HS series are constructed with durability in mind, featuring heat-dissipating design elements to ensure long-lasting performance under heavy use. With a compelling mix of power, efficiency, and customization, the Hifonics HS amplifiers are perfect for both casual listeners and audiophiles seeking a premium sound experience in their vehicles.