TESTING
❒Turn on the circuit breaker and light switch.
NOTE: Sensor has a 11/2 minute warm up period before it will detect motion. When first turned on or when switching modes wait 11/2 minutes.
❒Switch the
TEST 1 5 10 MIN | OFF 3 6 DUSK TO |
HOUR DAWN |
Avoid locations that will cause the
control to "see":
•Objects that change temperature rapidly, such as heating vents and air condition- ers. These heat sources could cause false triggering.
•Areas where pets or traffic may trigger the control.
•Nearby large,
180°
1.8 m
| 9.1 m |
Maximum | Maximum |
Range | Coverage Angle |
The detector is less sensitive to motion directly towards it and more sensitive to across motion.
MotionMotion
Sensor
Least Sensitive | Most Sensitive |
❒Walk through the coverage area noting where you are when the lights turn on.
❒If you need to change the sensitivity, temporarily remove the fixture and make the adjustment. Too much sensitivity may cause false triggering in some installations.
❒Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes).
TEST 1 5 10 MIN | OFF 3 6 DUSK TO |
| HOUR DAWN |
❒Set the amount of time after dusk you want the lights on accent level.
SPECIFICATIONS
Range . . . . . . . . . . . . . Up to 30 ft. (9.1 m) [varies
with surrounding temperature].
Sensing Angle . . . . . . . Up to 180°
Electrical Load . . . . . . Up to 100 Watt Maximum Incandescent
Sensor Capacity . . . . . Up to 360 Watt (3.0 A.) Maximum
Power Requirements . 120 VAC, 60 Hz Operating Modes . . . . TEST, AUTO and
MANUAL MODE Time Delay . . . . . . . . . 1 , 5, 10 minutes Dual Brite™ timer . . . . Off, 3, 6 hrs, to dawn
DESA Specialty Products™ reserves the right to discontinue products and to change specifications at anytimewithoutincurringanyobligationtoincorporate new features in products previously sold.
4 |
