Heath Zenith 598-1041-04 manual Motion Sensing Cast Aluminum Lantern for, Canadian Tire, Features

TEST 1 5 10 MIN

TEST 1 5 10 MIN

Motion Sensing

Cast Aluminum

Lantern for

Canadian Tire

Features

• Light comes on when motion is detected.

• Automatically turns light off.

TEST

Set the ON-TIME switch on the bottom of the cover plate to TEST.

AUTO

Set ON-TIME switch to 1, 5, or 10 minutes.

MANUAL MODE

•	Dusk Accent lighting.
•	Photocell keeps the light off during day-
	light hours.

This package includes:

•	Lantern
• Easy to use universal mounting bracket
	(X-Bar)
• Mounting hardware
•	Wire nuts

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and

MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1Second OFF then...

... back on.

Requirements

Mode Switching Summary

•The Light Control requires 120 volts AC.

•If you want to use Manual Mode, the con- trol must be wired through a switch.

•Some codes require installation by a qualified electrician.

OPERATION

Mode:	On-Time	Works: Day Night
Test	5 Sec	x	x

TEST

AUTO

MANUAL MODE

ON-TIME

Switch at 1,

5, or 10 minutes

Flip light

switch off for

one second

then back on*

Auto	1, 5 or 10 Min	x
Manual	To Dawn*	x
Accent 3,6 Hr, to Dawn		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 11/2 minutes for the circuitry to calibrate.

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

Dual Brite™ Dimmer Control

Light comes on half bright for selected time after dusk (3 hr., 6 hr., until dawn). If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or 10 minutes) then returns to dim mode.

© 2004 DESA Specialty Products™ 598-1041-04