INSTALLATIONWIRING
For best performance, mount the fixture about 1.8 meters above the ground.
❒ Turn power off at the circuit breaker or fuse.
BLACK 
WHITE
One Motion Light
1. Remove
2. Remove
X-Bar. two nuts.
3.Tighten screws finger tight.
5.Attach X-Bar to junction box
SENSITIVITY
MINMAX
4.Set sensitivity on fixture back to the
Junction
Box
BLACK 
BLACK
WHITE
Two Motion Lights
❒Twist the junction box wires and the fixture wires together as shown below. Secure with wire connectors. If you have a metal junction box, you may not need the green "pigtail". If you are unsure about the grounding method, consult your local building code.
CAUTION: If you are not controlling stan- dard fixtures from your Motion Sensing Coach Light, DO NOT connect the RED wire.
Recommended Grounding Method
Use a green ground "pigtail" (not provided) and twist one end together with the bare fixture wire and the box ground wire. Secure with a wire connector. Secure the other end of the "pigtail" with the GND screw on the
Due to the size and weight of the fixture, you may find it helpful to have an assistant hold the fixture in place while connecting the wires.
Black to black
White to white
2 |
