Eclipse - Fujitsu Ten CD2000 Direct channel selection, Manually setting channels into memory

How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only)

Direct channel selection

The channel can be selected by inputting the channel directly.

Press and hold the [SEL] button for

1 more than two seconds.

The mode will change to the direct channel selection mode.

Press the buttons [1], [2] and [3] to

2 select the channel number to be input.

[1]button .......... Hundreds

[2]button .......... Tens

[3]button .......... Units

Each time the buttons are pressed, the numerals change in the following order.

0 ➔ 1 ➔ 2 ➔ 3 ➔ 4 ➔ 5 ➔ 6 ➔ 7 ➔ 8

➔9

Pressing the button [6] clears the numeral at the previous digit.

3 Press the button [5].

Starts reception.

Manually setting channels into memory

This section covers the setting of channels in memory under the numbered buttons.

Turn the [SEL] button to the right

1 or left to tune to the channel to be entered in memory.

Select any button, from [1] to [6],

2 and press it for more than two seconds.

The tuned channel is now memorized and set in the selected button. Repeat the procedure to set additional manually tuned channels in memory, in turn, for buttons [1] to [6]. These buttons are called the preset buttons.

ATTENTION

If the vehicle’s battery is disconnected (for repairs to the vehicle or for removing the equipment), all channels in memory will be lost. In such a case, set channels in memory again.

Preset channel scan

This function enables reception of all the channels in the preset buttons for five seconds each.

Press the [SEL] button for less

1 than two seconds.

[P SCAN] will appear at the display, and channels stored under preset buttons [1] to [6] will be played for five seconds each.

To stop the preset scan mode at a

2 desired channel, press the [SEL] button again.

The equipment will stay tuned to the desired channel.

Switching displays when using the SIRIUS satellite radio

Press the [DISP FUNC] button for

1 less than one second.

Each time the button is pressed the display item changes in the following order:

channel name ➔ category name ➔ title ➔ artist ➔ SIRIUS unit ID.

ATTENTION

•The maximum number of characters that can be displayed for each item is as follows: Title: 38 characters

Artist: 38 characters

Channel: 20 characters

Category: 16 characters

•If there is no name, NO_ DATA will appear.

XII

37