Playing Audio via Aux, Troubleshooting

Playing Audio via Aux

1.Move the Travel Lock/Aux/Bluetooth Switch to the Aux position to listen to audio via aux line-in.

2.Connect the Left and Right speakers using the 3.5 mm stereo connection cable.

3.Connect the micro USB plug to the micro USB charging port on the back of the right speaker and connect the 3.5 mm audio plug to the headphone or line-out jack on your audio device.

4.Press and hold the Button to turn on the unit (release when blue light appears).

5.Use the Volume +/- Buttons to adjust volume. You may wish to adjust the volume on your audio device, too.

6.When done listening, press and release the Button to turn the unit off. Remember to turn off your audio device, too.

Troubleshooting

Unit doesn’t respond (no power)

•Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iDM15.

•Make sure the Travel Lock/Aux/Bluetooth Switch is not in the position, as this will disable operation.

Trouble pairing device/computer with iDM15

Bluetooth implementation varies depending on your computer’s hardware and operating system. Please see our website for updates on pairing.

•Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).

•Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking.

For further information and to see the latest instructions, visit