Meet Your Unit | Step a | Press here to open |
Included
• iDM15 system (2 x speakers)
• Travel case/iPad stand
• 24 inch micro USB to USB/3.5 mm charging and aux. audio cable
• 24 inch 3.5 mm stereo connection cable
Setup
The unit includes a travel case that doubles as a stand for your iPad | Step b | ||
or other tablet or device. Reverse these steps to repack for travel. | |||
To use as a stand: |
|
| |
a. | Press in on center of the case where indicated to |
|
|
| release the lid from the base. |
|
|
b. Remove speakers. Remove cables from |
|
| |
| compartment in top of case. |
|
|
c. | Place base of case upside down on flat, stable |
|
|
| surface with tab facing forward. | Steps c/d | |
d. | Slide the top (iHome brand badge facing | ||
upwards) onto the tab on the bottom/stand.
e. Place iPad/iPad 2 into groove. For best stability, position iPad/tablet in landscape mode.
Travel Lock:
a.Move the Travel Lock switch on the back of the right speaker to the 
position to temporarily disable the
unit and prevent accidental button activation during | Step e |
travel that might drain the battery. Move switch to | 2 |
Bluetooth or Aux position for normal operation. |
|