Using Bluetooth: Pairing Your Device
NOTE: See the iDM15 Bluetooth Connection Guide for complete pairing details.
1.Move the Travel Lock/Aux/Bluetooth Switch on the back of the right speaker to the Bluetooth position (right).
2.Press and hold the 
Button to turn on the unit (release when 
light appears blue).
3.Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device).
4.Press and hold the Bluetooth/Speakerphone Button on the unit until a blue 
light flashes on the button and the unit beeps twice to indicate pairing attempt. The blue light will flash while the unit attempts to pair. If your device asks for a password, enter 1234 on the keyboard of your device.If no device is paired within 2 minutes, the 
Button will glow red for 2 seconds and the unit will power off. If this occurs, retry steps
5.Once paired with a device, the blue 
light will glow steadily. There should be an indication on your device that pairing is complete. On some devices, you must then select “use as a stereo audio device” or similiar on the device’s Bluetooth menu. Once paired, your device should link to the iDM15 whenever within range.
4