| Troubleshooting Continued |
|
|
Symptom | Solution |
|
|
There is static or loss | If you are using your SIRIUS radio’s FM transmitter to wirelessly |
of clarity in the SIRIUS | transmit the audio from your SIRIUS radio to your vehicle’s FM |
radio’s audio signal | radio, the FM channel you selected is most likely being used by |
| a local broadcaster, which is interfering with the performance of |
| your SIRIUS radio. Turn off your SIRIUS radio and tune through |
| the FM channels on your vehicle radio to locate an FM channel |
| (between 88.1 and 107.9 MHz) that is not broadcasting in your |
| area. Once you have located an FM channel that is not broadcast- |
| ing in your area, save it as a preset on your vehicle radio. This will |
| be your SIRIUS preset. Turn on your SIRIUS radio and locate its |
| FM Frequency adjustments (under “FM Transmitter Options” in |
| Settings or Menu). Set the FM frequency on your SIRIUS radio to |
| match the frequency of the SIRIUS preset on your vehicle radio. |
| Note: To find the best FM frequency with the lowest interference |
| in your home or travel cities, you can also go to http://www.sirius. |
| com and use the My SIRIUS Frequency Finder and search for a |
| suggested FM frequency based on zip code. |
| If you are connecting your SIRIUS radio directly to your vehicle’s |
| audio system using an “AUX IN” or “LINE IN” input, the cable |
| may not be properly connected. Make sure the cable is properly |
| connected, both to the “AUX IN” or LINE IN” connector on your |
| vehicle’s audio system and to the “LINE OUT” connector on your |
| SIRIUS radio. |
|
|
18 [ Troubleshooting ]