Sirius Satellite Radio 051707a, SUVA2, DOT2 manual SUV/Mini-Van Antenna Cable Routing Procedure

Page 10

5.Bring the end of the cable out at the SIRIUS radio location. Leave yourself enough cable so you can easily connect it to the antenna connector of the SIRIUS radio or vehicle dock.

SUV/Mini-Van Antenna Cable Routing Procedure

Figure 6 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in an SUV or a Mini-Van.

1. Feed Cable Under

 

Rubber Seal Around

4. Bring Cable Out To

Hatch Opening

SIRIUS Radio

 

Location

3. Route Cable

Under Carpet

to Dashboard

2. Route Cable Under

Interior Trim, into

Cabin and Towards

Front of Vehicle

Figure 6

Follow these detailed cable installation instructions:

1.Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/door and route the cable along the rear hatch. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Pull the cable out from weather stripping and route it into the cabin under the interior trim. Avoid hinges or gears that could crimp or cut the cable.

2.Route the cable through the SUV’s main cabin area under the interior trim, towards the front of the vehicle. Use a plastic putty knife to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the

10 [ Installation ]

Image 10
Contents Installation Guide Page Package Contents Installation Antenna MountingSedan/Coupe Pickup Truck SUV/Mini-Van Convertible Installation Sedan/Coupe Antenna Cable Routing Procedure Cable RoutingPickup Truck Antenna Cable Routing Procedure Installation SUV/Mini-Van Antenna Cable Routing Procedure Convertible Antenna Cable Routing Procedure Installation Tips Tips Do Not Away Troubleshooting Symptom SolutionTroubleshooting Copyrights & Trademarks Sirius Satellite Radio Inc 800 869-5590 http//sirius.com New York, NY 800 Http//sirius.com New York, NY 800 Http//sirius.com