Installation (continued)
Mounting and removing the Main Unit
❏Mounting Procedures (When using Mounting Collar q)
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Power Connector
Mounting springs (C)
Insert Mounting Collar q into the
1 dashboard, and bend the mounting tabs out with a screwdriver.
The tabs to be bent vary depending on the vehicle. To securely install the unit, fully bend a number of the tabs so that there is no rattling.
Example:Tab
q Mounting
Collar
Mounting Holes
Mounting Bolt
2 | Establish the rear connection of the unit. |
After fixing Power Connector, fix the rear of the |
unit to the vehicle body by either method (a) or (b) shown in the next page.
3 | After installation reconnect the negative |
|
Engage the Mounting Springs (C) in the mounting holes of the Mounting Collar
qfirmly.
Mounting |
Hole |
Mounting Spring
20