Error Display Messages (continued)
USB
A USB device is not connected or the connected device cannot be recognized.
a Use the type of USB memory that is suitable for this unit.
Your USB device has no playable file.
a Download playable file to your USB device.
A USB device the capacity of which exceeds the acceptable current was connected.
For some reason, an
a Use a USB device that has a consumption current of less than 500 mA. a Switch the source, and select the USB mode again.
aCheck that the USB connector section is not dirty, and that there is no foreign material.
No operation by some cause.
a Turn off the power and turn on the power again, or turn the key to the ACC OFF position and turn the key to ACC ON position again. If this does not solve the problem, unplug the power cord and plug it in again. In case the unit is still out of order, consult your dealer.
The player for some reason cannot read the file you are trying to play. (File recorded in an unsupported file system, compression scheme, data format, file name extension, damaged data, etc.)
a Confirm that the USB extension cable is firmly connected, and reconnect if not. Select a file that the player can read. Check the type of data stored in the USB device. Format the USB device if necessary.
A WMA file can be copyrighted.
a The file protected by copyright is not playable.
28