Panasonic C1335L, CQ-C1335U, C1305L, CQ-C1305U Specifications, General, FM Stereo Radio, AM Radio

Specifications

General

Power supply	: DC 12 V (11 V – 16 V DC), test voltage
	14.4 V, negative ground
Current consumption	: Less than 2.1 A
	(CD mode; 0.5 W x 4 channels)
Maximum power output	: 50 W x 4 channels (at 1 kHz), volume
	control maximum
Tone adjustment range	: Bass: ±12 dB at 100 Hz,
	Treble: ±12 dB at 10 kHz
Speaker impedance	: 4 – 8 
Pre-amp output voltage	: 2.5 V (CD mode, 1 kHz, 0 dB)
Pre-amp output impedance	: 200 
Dimensions (W x H x D)	: 178 x 50 x 160 mm
	{7 x 1 15/16 x 6 2/16}
Weight	: 1.3 kg {2 lbs. 14 oz}
Front AUX input
Input impedance	: 10 k
Allowable external input	: 2.0 V
Connector	: 3.5 mm  Stereo mini-pin

Disc Player

Sampling frequency	: 8 times oversampling
DA converter	: 1 bit DAC System
Pick-up type	: Astigma 3-beam
Light source	: Semiconductor laser
Wave length	: 790 nm
Frequency response	: 20 Hz – 20 kHz (±1 dB)
Signal to noise ratio	: 96 dB
Total harmonic distortion	: 0.01 % (1 kHz)
Wow and flutter	: Below measurable limits
Channel separation	: 75 dB

FM Stereo Radio

Frequency range	: 87.9 MHz – 107.9 MHz
Usable sensitivity	: 10.2 dBf. (0.9 µV, 75 )
50 dB quieting sensitivity	: 15.2 dBf. (1.6 µV, 75 )
Frequency response	: 30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity	: 75 dB
Stereo separation	: 35 dB (1 kHz)
Image rejection ratio	: 55 dB
IF rejection ratio	: 100 dB
Signal/noise ratio	: 62 dB

AM Radio

Frequency range	: 530 kHz – 1 710 kHz
Usable sensitivity	: 27 dB/µV (22 µV, S/N 20 dB)

Above specifications comply with EIA standards.

Power Output:

18 W RMS x 4 Channels at 4  and 1% THD+N Signal to Noise Ratio:

85 dBA (reference: 1 W into 4 )

Notes:

•Specifications and design are subject to modification without notice due to improvements.

•Some figures and illustrations in this manual may be different from your product.