Panasonic CQ-DF501 Place the Removable Face, Plate into Case, Install Removable Face Plate

GN	Anti-Theft System	Electrical Connections
E

L

I

S	This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.
H				Cautions:
	The security indicator will blink.
15				≥This product is designed to operate of a 12 V DC, negative ground battery system.
	Place the Removable Face
				≥To prevent damage to the unit, be sure to follow the wiring diagram on the next page.
	Plate into Case			≥Remove approx. 5 mm of protective covering from the ends of the leads before connecting.
		7 Removable face plate case		≥Do not insert the power connector into the unit until the wiring is completed.
	1 Switch off the power of the unit.			≥Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables
	2 Remove the removable face plate. (➡ page 23)			and keep cable terminals free from touching any metal parts.
	3 Gently press the button of the case and open			≥Remember, if your car has a drive computer or a navigation computer, the data of its memory may be
	the cover. Place the face plate into the case and			erased when the battery terminals are disconnected.
	take it with you when you leave the car.
				Accessory used for wiring
				No.	Item	Q’ty
	Install Removable Face Plate		Contact	6	Power connector	1
	1 Fit the face plate with its left hole on one of the
	pins provided on the main unit.			Recommended external amplifier combination (example)
	2 Fit the other hold on the other pin applying
				≥Pre-amp out (rear/front) [CY-M9054 (4 channels system)]
	slight pressure.
				≥Subwoofer out [CY-M9054 (2 channels system) or CY-M7052 (1 channel system)]
	3 Move the face plate up and down a few times to		2
		3
	make sure it is secure. Then close the front
		1
	panel and press down the right side of the face
	plate until it clicks into plate.					(Continued to the next page.)

E

N

G

L

I

S

H

16

Security Indicator

The security indicator blinks when the removable face plate is removed from the unit.

Press and hold [SEL] to turn the security indicator on or off. (“LED ON” or “LED OFF”).

Default

Display Security indicator

Blinks

OFF

Security indicator

Cautions:

≥This face plate is not water-proof. Do not expose it to water or excessive moisture.

≥Do not remove the face plate while driving your car.

≥Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.

≥Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.

≥If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

≥Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be damaged.

24 25

CQ-DF501/DF301W CQ-DF501/DF301W