Panasonic C9801W, CQ-C9901W operating instructions Radio, Sound Control, Sound Quality Menu display

Sound Control

Radio

A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum recep- tion.

SOUND QUALITY Menu display

You can make a fine adjustment of SQ and Position.

1 Set the SQ mode to on.

2 Hold down [CS] (SQ) for 2 sec. or more to display the audio menu display.

SRCCS

3 Press [}] or [{] to select a function to be adjusted.

4 Press [BAND]

(SET) to adjust.

5 Adjust the setting value.

[}][{][]][[]: Select

[BAND](SET): Confirm

6 Press [DISP] to confirm the adjustment.

SQ PRESET SELECT

Select your favorite type from 6 kinds of SQ Presets.

Note: You can also select the SQ preset number by pressing [1] to [6] on the remote control.

SQ ADJUSTMENT (SQ9)

You can make a fine adjustment to the currently selected SQ presetting in each type (except FLAT).

[]][[]: Frequency band selec- tion

qw: Frequency selection

[}][{]: Level up/down

Note: If you hold down [BAND] for 2 sec. or more, the presetting that is called up can be turned into the default.

SQ PRESET MEMORY

The current value is assigned to one of SQ preset 2 to 6.

1 Select a preset number by pressing

[}], [{], []] or [[] .

2 Hold down [BAND] for 2 sec. or more.

Note: You can also select the SQ preset number by pressing [2] to [6] on the remote control, and assign the current value to the selected preset number by holding down the same button for 2 sec. or more.

POSITION

You can make the optimal sound field in accordance with your seat.

	2 Press [BAND] to select a band.		English
	1 Press [SRC: SOURCE] to select the	SRCSRCCS
FlowOperation	radio mode.		SoundControl
	tions are good in the station search, set LOCAL to ON.	[{] (P·SET: PRESET): Lower preset number
		3 Select a station.
		Frequency adjustment
		[]] (TUNE): Lower
		[[] (TUNE): Higher
		Note: Hold down for 0.5 sec. or more and release
		for station search.
	Notes:	Preset station selection
	¡ For tuning in on only stations whose receiving condi-
	(a page 21)	[}] (P·SET: PRESET): Higher preset number
	¡ For reducing noise when a receiving FM stereo wave
	is weak, set FM MONO to ON. (a page 21)	Notes:
		¡ Direct Access can be executed with [1] to [6]	Radio
		buttons on remote control.
		¡ Stations in FM 1 to 3 are sequentially selectable
		without changing bands when “ALL BAND” is
		selected in “AUTO PRESET”.

	Preset Number	Frequency
display	Band
		Indicates the intensity of
mode		the radio wave.
	Lights while receiving an FM stereo signal.	Lights when LOCAL is
Radio	(“STEREO”: CQ-C9801W)	activated. (a page 21)
	Lights when MONO is activated.
	(a page 21)

18 CQ-C9901W/C9801W CQ-C9901W/C9801W 19