Customize the Display
You can edit the moving images and still images that are initially stored in the unit. You also can use the data that is downloaded from the Panasonic Web site and the data that is stored with a digital camera or other devices and processed with exclusive software, IMAGE STUDIO. See “Notes on Customize Function” (a page 37) as well.
Note: Visit Panasonic Web site (http://panasonic.co.jp/pas/en/software/customize/index.html) for details.
Note on Download Service
Error Display Messages
Preparation:
Put the
1 If there is a disc inside, take out the disc.
6 Select a file.
Example: GRAPHIC PATTERN
The download service may be suspended or stopped without advance notice. The download service is not available in some areas. Please visit the site below for further information.
Panasonic Web site: (http://www.panasonic.co.jp/global/)
Notes on IMAGE STUDIO
NO FILES DETECTED
No
aLoad a disc that contains
CUSTOMIZING FAILED
Customize failed
English
2 Press [SRC:
SOURCE] to
SRCSRCCS
[}][{][]][[]:Select
[BAND] (SET): Confirm
¡ This download service is not available in some areas. |
For details, please access the Panasonic website. |
a Check to see whether or not the extension is cor- |
rect and file contents are appropriate. |
CUSTOMIZE Menu display
select the CD mode.
3 Hold down [SEL] for 4 sec. or more to display the menu screen.
4 Load a
Note:
¡It may take time for the unit to identify the CD- R/RW.
¡Discs recorded by the packet writing software are not supported.
5 Select an item to be customized.
[}][{]: Select
[BAND] (SET): Confirm
Note: To exit the customize menu, hold down [SEL] 4 sec. or more.
GRAPHIC PATTERN
Moving image data (a page 35)
STILL IMAGE
Still image data (a page 35)
OPENING MESSAGE
Moving image at power on (a page 12)
CLOSING MESSAGE
Moving image at power off (a page 12)
Notes:
¡Files are automatically identified by their exten- sions, and target files are displayed.
¡If [BACK] is selected, the screen of step 5 appears.
7 For a moving image file or still image file, select where to save the file.
[]][[]: Select
[BAND] (SET): Confirm
Notes:
¡New data overwrites existing data.
¡If [BACK] is selected, the screen of step 6 appears.
8 Confirm the changed item.
[]][[]: Select
[BAND] (SET): Confirm
Customization is performed. Do not turn off the power in
Note: If [NO] is selected, the screen of step 5 appears.
9 Press [OPEN] to eject the disc.
10 Hold down [SEL] for 4 sec. or more.
The CD mode comes back.
Notes on Customize Function
¡ IMAGE STUDIO is available only by downloading from |
the address below. It is not bundled with this unit. |
¡ Refer to the downloaded operating manual for how to |
use IMAGE STUDIO. |
Notes on File
¡The
¡Do not change the extension. Otherwise, the data can- not be recognized.
At Disc Making
¡Save only
¡Save all data in the root directory. Files contained in a folder cannot be recognized.
¡Follow the table below with regard to the number of files that are saved to a disc. Files beyond the speci- fied capacity are not readable.
Type | Extension | Max. number |
|
|
|
GRAPHIC PATTERN | .pfm | 10 |
STILL IMAGE | .pfs | 15 |
OPENING MESSAGE | .pfo | 5 |
CLOSING MESSAGE | .pfe | 5 |
|
|
|
At Customizing
¡If customizing is interrupted on account of turning off the power, stopping the engine, removing the face plate or other reasons, you may lose the data. In such a case, try customizing again.
¡The default image exists on the Panasonic Web site. If you would like to restore it, download the image from the site.
Download site:
http://panasonic.co.jp/pas/en/software/
customize/index.html
DISPLAY FILE INCOMPLETE
Intended moving image or still image is damaged.
aCustomize it again and overwrite the file with new one.
Customize the Display
36 |
|
| 37 | |
|
|
|
|
|