Firmware Update
There may be future updates to the
The Firmware Update page is reached from the Installers Setup screen. This screen is the first step in the firmware update process. The Russound Programming Cable (P/N 2500- 121036) must be connected to the OS update port on the front of the
The controller must be power cycled after the firmware or screens have been updated. If multiple screens are being updated, power cycle after all have been updated.
Russound Information
The Russound Information page is accessed by pressing on the Russound logo on the Installers Setup screen. You can also press the “UNO” logo on the touchscreen Home screen.
The screen shows the Russound phone number and web address.
This screen can also be used as a “cleaning” screen, as nearly all its inactive surface can be firmly wiped without initiating any control actions.
INSTALLER GUIDE
Other Installer Setup Functions
Firmware Update
This screen is shown when “Firmware Update” is selected
Russound Information
This screen is shown when “Russound” is pressed on the Installers Setup screen
25
