Russound UNO-TS2 manual Numeric Station/Channel Selection, Example of AM/FM tuner screen

USER GUIDE

Controlling the Russound ST2 Tuner

The ST2 tuner screens on the UNO-TS2 allow you to directly enter a station’s frequency or perform a station seek or scan function from the touchscreen. Bank and preset memory names show in a single screen view, and you can save a new preset right from the touchscreen. If the UNO-TS2 is powered on before the ST2 Tuner is turned on, existing preset names may not appear until after the tuner’s boot up procedure is complete (less than a minute).

Numeric Station/Channel Selection

Tuner stations or channels can be directly select- ed from the numeric entry screen. For satellite radio channels, enter the channel number (from

1 to 3 digits). For AM/FM, enter the 3- or 4-digit frequency number. Press the AM or FM button to conveniently switch between AM and FM from the touchscreen.

Tuner 2

2 of 3

Example of numeric station/channel selection screen for ST2 Tuner

AM/FM Tuner Advanced Features 107.1 MHz FM

The AM/FM tuner advanced controls are accessed from the “3 of 3” screen. Select Local or Distant reception and stereo or mono signal. For Seek and Scan functions, press the appropri- ate button to begin. Press the Stop button to end. The hard button secondary function lets you select a frequency by tuning up or down, and select a preset memory from the current bank without leaving this screen.

Example of AM/FM tuner screen

10