Russound manual UNO-TS2 IR Receiver Connection

INSTALLER GUIDE

UNO-TS2 IR Receiver Connection

The UNO-TS2 also has an External IR Receiver In terminal for connecting an external IR Receiver such as the Russound 858, SaphIR 862 Eye, or SaphIR 860 Phantom.

If you plan to use an additional IR receiver with the UNO-TS2, first determine the location of the IR receiver, then measure the distance from the intended location to the UNO touchscreen loca- tion. Incorporating optional IR receivers will require additional wire. Consult the selected IR

receiver model’s manual for the specific wire needs.

Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIGNAL) and the other pair connecting ST (STATUS) and V+ (+12VDC). Connect the shield or drain to ground at the UNO-TS2 only.

Note: Installing an external IR receiver and UNO-TS2 in the same room, with visibility to both may cause poor IR performance.

Back of

858IR

Receiver

NEWMARKET, NH USA		RNET
		+12V	BR
		+12V	BR/W
		GND	GR
UNO-TS2		STATUS IN	GR/W
		GND	OR
		IR OUT	OR/W
		COM A	BL	CAT-5
		COM B	BL/W
EXTERNAL IR				connection
RECEIVER IN			RESET	to RNET
+12V GND SIGNAL STATUS
				device
	DESIGNED IN USA MADE IN KOREA

Back of

UNO-TS2

19