Panasonic CQ-C800U Security Function Setting, Other Settings, Clock adjustment, Using Subwoofer

For using the remote control, use [}] or [{].

Security Function Setting

The following functions are activated when the Security Function is ON. (a page 29)

¡The security indicator lights up when removing the face plate.

Security Indicator

¡The alarm sounds and the message appears on the

screen to warn you to remove the face plate at ACC

off. English

Other Settings

	Preparation
You may need to set the following depending on the
devices to be connected.
Using Subwoofer

¡Subwoofer level adjustment (a page 28)

¡Subwoofer low pass filter (a page 28)

Note: Other settings are required when a Sirius receiver, an XM receiver, or a Hands-Free Phone System is connected. (a System Upgrade Guidebook)

Clock adjustment

Note: Adjust the clock when “ADJUST” appears on the display.

1 Press [MENU] to display the menu display.

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

2 Press []] or [[] to display the DISPLAY menu.

3 Turn [VOL] to select “CLOCK ADJ”.

4 Press [PUSH SEL], and the clock adjustment screen appears.

For using the remote control, use [BAND] (SET).

5 Adjust the setting value.

[[] : Adjusting minutes

[]] : Adjusting hours

q : Forward

w : Backward

6 Press [PUSH SEL], and the menu screen resumes.

For using the remote control, use [BAND] (SET).

7 Press [MENU] to close the menu screen.

For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.

CQ-C800U13