Panasonic CQ-C800U operating instructions Troubleshooting, If You Suspect Something Wrong

Page 33

Troubleshooting

If You Suspect Something Wrong

Check and take steps as described below.

If the described suggestions do not solve the problem, it is recommended to take the unit to your nearest authorized Panasonic Servicenter. The product should be serviced only by qualified personnel. Please refer the checking and the repair to professionals. Panasonic shall not be liable for any accidents arising out of neglect of checking the unit or your own repair after your checking.

Never take measures especially for those other than indicated by ital- ic letters in “Possible Solution” described below because those are too dangerous for users to handle themselves.

Warning

¡Do not use the unit in an irregular condition, for example, without sound, or with smoke or a foul smell, which can cause ignition or electric shock. Immediately stop using the unit and consult your dealer.

¡Never try to repair the unit by yourself because it is dangerous to do so.

Troubleshooting English

Common

Problem

No power to the

unit

Sound is not

generated.

Noise

Noise is made in step with engine revolutions.

Possible cause a Possible solution

The power cord (battery, power and ground) is connected in the wrong way.

aCheck the wiring.

Fuse blows out.

aEliminate the cause of fuse blowout and replace the fuse with new one. Consult your dealer.

MUTE is set to ON.

aSet MUTE to OFF.

The wiring of speaker lines are not correct, or a break or poor contact arises.

aCheck the wiring in accordance with the wiring diagram. (Installation Instructions)

There is an electromagnetic-wave generator such as a cellular phone near the unit or its electrical lines.

aKeep an electromagnetic-wave generator such as a cellular phone away from the unit and the wiring of the unit. In case that noise cannot be eliminated due to the wiring harness of the car, consult your dealer.

The contact of the ground lead is poor.

aMake sure that the ground lead is connected to an unpainted part of the chas- sis securely.

Alternator noise comes from the car.

aChange the wiring position of the ground lead.

aMount a noise filter on the power supply.

Customize the Display (Customize Function),

CQ-C800U33

Image 33
Contents Model CQ-C800U Safety Information Safety Information FCC Warning Before Reading These InstructionsEnglish AccessoriesAccessory Purchases Customer Services DirectoryService in Puerto Rico CanadaBefore Reading These Instructions Limited WarrantyFeatures Contents Controls Layout When Face Plate OpensUnit MainOperations executable only with remote control Remote Control UnitControls Layout Number ButtonsRemote Control Preparation PreparationPreparation Before Initial Use Other Settings Security Function SettingClock adjustment Using SubwooferPower on On/offPower Powerpwr Power offGeneral RemovingMotion Open/Close, Tilt Face Plate Volume Adjustment VolumeRadio System-up ConnectorPlayer AUXAt power-off At power-onDisplay Change General Dimmer ControlSound Control SettingSRS TruBass SRS FocusSound Control Substitutional Subwoofer AdjustmentSelection SQ changeoverRadio Mode DisplayFlow Direct MemoryStation PresetDisplay RadioOperation Flow Track selectionPause CD Player Repeat Play CD Menu DisplayRandom Functions Only byMP3/WMA/AAC Player Mode DisplayPlayer Folder selectionMP3/WMA/AAC Player Functions Only by Remote Control UnitText Scan All filesCompressed audio files Setting at file makingAs to disc making No warrantyMP3/WMA/AAC Player Common Compressed audio file writingAudio Setting Setting,Audio Function SettingMute KEY SecurityDemonstration Display SettingGraphic Pattern Still Image PatternStill Image Customize Menu DisplayOpening Message Closing MessageFunction Error Display MessagesAt Customizing At Disc MakingProblem No power to Unit Sound is not Generated Noise TroubleshootingPossible cause a Possible solution If You Suspect Something WrongCheck the wiring of the antenna battery lead Check the speaker wiringCompressed audio Problem No playback or Disc ejected Sound skipping or NoiseDisc unejectable Sound skipping due to vibrationProblem Troubleshooting, Error Display Messages Error Display MessagesCD/Compressed Audio DisplayCleaning Unit Fuse Maintenance/FuseHow to hold the disc Disc cleaningSpecifications Corporation of North America Division of Panasonic Rico, Inc. PSC