Panasonic CQDF202 Installation Guide Anti-Theft System, Remove the Unit, Panel Removal Alarm

Page 9

E N G L I S H

Installation Guide (Continued)

Anti-Theft System

G

 

 

E

 

 

N

 

 

L

 

 

I

Remove the Unit

This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.

S

H

17

Switch off the power of the unit.

1Remove the removable face plate.

1 Press [OPEN]. The removable face plate will be opened.

45W X 4 OPEN[OPEN]

RANDOM

REP

PWR

SOURCE

2Push the face plate to the left.

3 Pull it out toward you.

Main unit

Contact

 

 

1 Open

 

 

 

 

 

2 Push

3 Pull out

Place the Removable Face Plate into Case

1Switch off the power of the unit.

2Remove the removable face plate. (page 26)

3 Gently press the bottom of the case and open the cover. Place the face plate into the case and take it with you when you leave the car.

Install Removable Face Plate

18

7 Removable face plate case

2Remove the trim plate 8 with a screwdriver.

8Trim plate

Screwdriver

1

2

1Fit the face plate with its left hole on one of the pins provided on the main unit.

2Fit the other hold on the other pin applying slight pressure.

3Move the face plate up and down a few times to make sure it is secure. Then close the front panel and press down the right side of the face plate until it clicks into plate.

 

Contact

3

2

 

1

 

3Pull out the unit while pushing down the lock lever with a screwdriver.

Lock lever

Lock lever

Panel Removal Alarm

This alarm sounds to warn you not to forget to re- move the panel before leaving your car.

Press and hold [SEL] to turn the panel removal alarm on or off. (“ALRM On” or “ALRM OFF”)

Default

Caution:

4Remove the unit pulling with both hands.

This face plate is not waterproof. Do not expose it to water or excessive moisture.

Do not remove the face plate while driving your car.

Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.

Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical con- tacts.

If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or it might be damaged.

26

CQ-DF202W

 

CQ-DF202W

27

 

 

 

 

 

 

 

 

Image 9
Contents Volume Level Meter PowerTime Reset LoudnessRadio Mode Disc Insert and Playback Open the front panel Listening to a CD Mode SelectionDisc insert Stop and Disc EjectTroubleshooting Tips TroubleshootingPreliminary Steps If You Suspect Something WrongTroubleshooting Sound SettingRadio Error Display Messages MaintenanceMaintenance Product ServicingInstallation Guide Installation Guide Final InstallationPreparation Install Removable Face Plate Installation Guide Anti-Theft SystemPanel Removal Alarm Remove the UnitElectrical Connections Specifications Wiring DiagramGeneral AM Radio