Panasonic CQ-VX2200W Precautions, Typical Installation For vehicle with double-DIN size

❏Precautions

¡We strongly recommend that you wear gloves for installation work to protect yourself from injuries.

¡When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands and fingers.

E

N

G

L

I

S

H

261

Transportation bracket removal

Be sure to remove the bracket for transportation before use (installation).

CUse screws (5 mm φ x 8 mm) with washers for installation.

Be careful not to lose any of these parts.

Note:

Transportation Bracket x 2

Screw with washer (5 mmφ ⋅ 8 mm) x 4

CQ-VX2200W

¡The screw holes on the right side are not tapped. Please only use screws provided to mount the unit. ¡To tighten the screws, press its head down straight forward.

❏Typical Installation (For vehicle with double-DIN size)

1.Remove Car radio or little object box from the vehicle and the stopping brackets.

2.Use the appended screws q or w to install the brackets on this unit.

3.Install this unit into the vehicle.

Note: Use a pench to bend the	Bracket (R)	Appended Screws (q or w).
fingers on the bracket vertically.		Select appropriate ones matching
		the hole shape of the bracket.
Bracket (L)
		q Binding-Head
		Sdrew x 8
		(5 mmφ x 8 mm)
		w Flat-Head
		Screw x 8
	CQ-VX2200W	(5 mmφ x 8 mm)
¡If a special kit (option) is necessary for a certain year’s, model or grade of		Note: Binding-Head screws (5 mmφ
		x 8) q are appended four pieces, the
vehicle, please consult your dealer.
		other four pieces are fixed on the
¡For electrical connecting simply to your vehicle, you can buy a prepared		transportation bracket. [Screw with
power connector from your dealer.		washer (5 mmφ x 8 mm)]

❏Installation for except for the above motors

For general use kit (option) or motor’s special kit (option), Please consult your dealer.

CQ-VX2200W35