Panasonic CQ-VX2200W operating instructions Identify All Leads

Page 27

❏Identify All Leads

The first step in installation is to identify all the car wires you’ll use when hooking up your sound sys- tem.

As you identify each wire, we suggest that you label it using masking tape and a permanent marker. This will help avoid confusion when making connections later.

Note: Do not connect the power connector to the stereo unit until you have made all connections. If there are no plastic caps on the stereo hooking wires, insulate all exposed leads with electrical tape until you are ready to use them. Identify the leads in the following order.

Power Lead

If your car has a radio or is pre-wired for one :

Cut the connector wires one at a time from the plug (leaving the leads as long as possible) so that you can work with individual leads.

Turn the ignition on to the accessory position, and ground one lead of the test bulb to the chassis.

Touch the other lead of the test bulb to each of the exposed wires from the cut radio connector plug. Touch one wire at a time until you find the outlet that causes the test bulb to light.

Now turn the ignition off and then on. If the bulb also turns off and on, that outlet is the car power lead.

If your car is not wired for an audio unit :

Go to the fuse block and find the fuse port for radio (RADIO), accessory (ACC), or ignition (IGN).

Battery Lead

If your stereo unit has a yellow lead, you will need to locate the car's battery lead. Otherwise you may ignore this procedure. (The yellow battery lead pro- vides continuous power to maintain a clock, memory storage, or other function.)

If your car has a radio or is pre-wired for one:

With the ignition and headlights off, identify the car battery lead by grounding one lead of the test bulb to the chassis and checking the remaining exposed wires from the cut radio connector plug.

If your car is not wired for an audio unit :

Go to the fuse block and find the fuse port for the battery, usually marked BAT.

Speakers

Identify the car speaker leads. There will be two leads for each speaker, usually color coded.

A handy way to identify the speaker leads and the speaker they connect with is to test the leads using a 1.5 volt AA battery as follows.

Hold one lead against one pole of the battery and stroke the other lead across the other pole. You will hear a scraping sound in a speaker if you are hold- ing a speaker lead.

If not, keep testing different lead combinations until you have located all the speaker leads. When you label them, include the speaker location for each.

Antenna Motor

If your car is equipped with an automatic power antenna, identify the car motor antenna lead by con- necting one bulb tester lead to the car battery lead and touching the remaining exposed wires from the cut radio connector plug one at a time. You will hear the antenna motor activate when you touch the cor- rect wire.

Antenna

The antenna lead is a thick, black wire with a metal plug at the end.

E

N

G

L

I

S

H

241

CQ-VX2200W33

Page 26 Page 28
Image 27
Page 26 Page 28
Contents CQ-VX2200W Safety Information Components Use This Product SafelyRemote Control Battery InstallationControl Reference Guide Behind the Front Panel Name of Controls and FunctionsDisplay Change Power and Basic OperationsPower On / Off VolumeMode Selection Clock SettingMute / ATT Attenuator Tuning BandMono / Local selection Calling Preset Station SettingManual Preset Memory StationTrack Selection Disc Insert / EjectVarious Way of Listening Random Play Scan Play Repeat PlayPress Tape Insert / Eject Play Side ChangeFast Forward / Rewind MTL Lights Press again to cancelFast forward Fast reverse Changer modeDisc Selection Next disc Previous discPlay Scan Repeat All Tracks Current Disc First Track on All DiscsPress and hold for more than 2 seconds Source AUX Sound SpaceDirect Memory External SoundExample Source Press to change to AUX in modeSpace Press to change as follows ·M Press·A Press to change as follows Default WaveDisplay Pattern Spectrum Analyzer Display Pattern·A Press to change Press to change as followsSpeana Posi Positive Press to select Sound SettingTone Quality Save Your Tone Quality PreferencePress Press to select and adjustAfter changing to the GEQ adjusting display SetSuper Base Control Sub-Woofer/SBC-SW Balance and FaderSound Image Position Bass Enhancement100 Hz All seats Front rightFront left Bass Enhancement monaural ExampleSelect the Item DimmerMute/ATT Attenuator Speana Fast Overview Installation GuideInstallation Hardware Dashboard SpecificationsIdentify All Leads Final Installation Connect All LeadsFinal Checks Precautions Typical Installation For vehicle with double-DIN sizeInstallation for except for the above motors Wiring Diagram Electrical ConnectionsCD/Cassette Receiver CQ-VX2200W GrayFront Speaker Power ConnecterCQ-VX2200W Rear System Upgrade ExamplePower Amplifire CD ChangerCommon TroubleshootingPreliminary Steps If You Suspect Something WrongCassette Tape RadioRemote Control Sound SettingCD Changer Error Display MessagesReplacing the Fuse MaintenanceReset switch Product ServicingCare of the Unit MaintenanceSpecifications

CQ-VX2200W specifications

The Panasonic CQ-VX2200W is a top-tier multimedia car stereo system that seamlessly integrates advanced technology and user-friendly features, elevating the in-car entertainment experience. Known for its versatility and robust functionality, this unit caters to a variety of multimedia playback options while ensuring high-quality sound reproduction.

One of the standout features of the CQ-VX2200W is its sleek design, which includes a large, vibrant display that allows for easy navigation and interaction. The unit supports a wide range of audio and video formats, making it compatible with various media sources. Users can enjoy CDs, DVDs, and digital files from USB drives, ensuring that their favorite music and videos are always within reach.

The CQ-VX2200W is equipped with Bluetooth technology, allowing for hands-free calling and audio streaming. This feature enhances safety on the road, enabling drivers to stay connected without taking their hands off the wheel. The Bluetooth connection also facilitates easy pairing with smartphones, making it simple to access a vast array of streaming services and apps.

Another impressive characteristic of this car stereo is its built-in GPS navigation. The CQ-VX2200W features a comprehensive mapping system that provides real-time traffic updates and turn-by-turn directions. This functionality is invaluable for drivers looking to navigate unfamiliar areas quickly and efficiently.

Sound quality is a major aspect of the CQ-VX2200W, and Panasonic has ensured that this model delivers exceptional audio performance. The system includes multiple equalizer settings, allowing users to customize their sound experience based on personal preferences and the acoustics of their vehicle. Additionally, the integration of high-power amplifiers enhances overall sound clarity and richness.

For users who prefer visual entertainment during extended travels, the CQ-VX2200W also includes video playback capabilities. Passengers can enjoy movies and shows directly from the unit, further enriching the travel experience.

Overall, the Panasonic CQ-VX2200W stands out as a feature-rich car stereo system that combines multimedia capabilities with high-end audio performance. Its advanced technologies, user-friendly interface, and attention to sound quality make it a top choice for auto enthusiasts and casual listeners alike, ensuring that every journey is filled with entertainment and enjoyment.
Top Page Image Contents