Philips SDV9201/17, SDV9201K/17 user manual DTV Tuner Signal Strength EN

Page 7

DTV Tuner Signal Strength EN

Picture With Ghosting

Snow in Analog Picture

Impulse Noise in Analog

Good Clear Picture

installation and do not have severe multi-path problems such as in a very dense high rise area, you will in most cases receive a good stable DTV and Analog TV picture.

2.Tune your analog TV to a UHF TV channel (channel 14 or higher) that is on the same broadcast tower or tower location as the DTV stations you are try- ing to receive. If you do not know this information you can call your local TV station’s engineering department and ask them. If you have internet access, Antennaweb.org is also helpful. (www.antennaweb.org)

3.Slowly rotate antenna or walk location area with antenna while monitoring your analog TV. Find the location that has a stable picture with the least amount of ghosting.

4.Very often, ghosting can be minimized if you rotate your antenna until the pic- ture improves. Unfortunately, sometimes there is no solution for the problem due to surrounding terrain/obstructions. We are looking for a picture that is clear and free of ghosting.

Ghosting - This is a very common problem in areas with large buildings, hills or valleys. The signal bounces off of various surfaces and creates multiple images. This is sometimes called “multi-path” to describe the multiple signals that reach the antenna. In extreme cases, you may see six or more distinct clear images side by side overlapping each other. The problem can usually be resolved by moving the antenna mounting position six feet to the left or right and/or raising your antenna higher to receive a more direct signal.

Do not worry about snow in the analog picture; this is not a problem for DTV. Find a location where the analog TV has the least amount of ghosting, and color in the picture with the audio clearly heard.

5.Watch DTV channel for a few minutes to make sure picture is consistently stable without freezing, disappearing or breaking up. If picture is stable, securely mount antenna per enclosed mounting instructions.

6.For best results, do not run signal through diplexers or splitters, run new RG6 coaxial cable from antenna location directly to your DTV receiver. If you have a cable run of more than 100 feet or need to run through diplexers and/or splitters use a signal preamplifier that is installed as close to the anten- na as possible.

7.To avoid signal loss, do not attach the coaxial cable to the mast, use stand offs (fig. 7) (sold separately)

7

Image 7
Contents SDV9201/17 SDV9201K/17 Contents Antenna Grounding and Safety Warning Safety InstructionsAbout the Design of Your Antenna Assembly and installation instructions Assembly and installationAiming the Antenna Aiming the AntennaOverview DTV Tuner Signal Strength Indicator DTV Tuner Signal StrengthAnalog TV Pointing Method DTV Tuner Signal Strength EN Technical Support WarrantyLimited One-Year Warranty Technical SupportContenido Acerca del diseño de la antena Puesta a tierra de la antena y advertencia de seguridadInstrucciones de montaje e instalación Montaje e Instalación Perspectiva general Orientación de la antenaFuerza digital de Señal Orientación de la antenaMétodo de orientación con televisor analógico Fuerza digital de Señal Asistencia Técnica GarantíaSPAsistencia Técnica Garantía limitada por un año

SDV9201K/17, SDV9201/17 specifications

The Philips SDV9201/17 and SDV9201K/17 are advanced indoor antennas designed to enhance the digital TV viewing experience. With their sleek and modern design, these antennas not only offer aesthetic appeal but also deliver high-performance capabilities that significantly improve signal reception.

One of the standout features of the Philips SDV9201 series is its ability to provide a wide range of channel reception. The antennas are engineered to receive VHF and UHF signals, ensuring that users have access to a broad spectrum of over-the-air channels. This flexibility allows viewers to enjoy local broadcasts without the need for a cable subscription.

In terms of technology, the Philips SDV9201/17 and SDV9201K/17 utilize a high-gain design that enhances signal strength, minimizing the potential for interruptions or pixelation during broadcasts. The built-in amplification technology plays a crucial role in boosting weaker signals, making these antennas particularly effective in areas where reception might be challenging due to distance from broadcast towers or physical obstructions.

Another notable characteristic of these antennas is their ease of installation. Philips has designed the SDV9201 series for straightforward setup, allowing users to quickly connect the antenna to their television and begin accessing channels. The included mounting options also provide flexibility in placement, whether on a tabletop or wall-mounted, ensuring optimal performance based on the user's environment.

The antennas are also equipped with a compact and lightweight design, making them easy to transport and relocate as needed. This portability ensures that users can experiment with different placements to find the optimal position for signal reception without hassle.

In conclusion, the Philips SDV9201/17 and SDV9201K/17 indoor antennas offer an excellent combination of performance, versatility, and design. With their high-gain reception capabilities and user-friendly installation process, they are ideal solutions for anyone looking to enhance their digital TV experience and enjoy a wide array of channels without the need for traditional cable services.