Motorola HS850 manual Pairing Your Headset, Phone, Pairing to Additional, Devices, Step

Note: You can also use a		unique ID. After your headset and phone
Motorola Original™ Vehicle Power		are paired, your headset automatically
Adapter to charge your headset while in		connects to your phone any time you
your vehicle.		open the boom.
A fully charged headset battery provides		With your headset and phone in close
approximately:		proximity:
• talk time–8 hours
		Step
• standby time (boom open)–200
		1 Put your headset into pairing mode.
hours		a With the headset’s boom closed,
Pairing Your Headset			press and hold the Multifunction
			Button E until the headset
and Phone			indicator turns on (about
			3 seconds).
Note: You must pair your headset and		The headset indicator turns on.
phone before you can make a call.		b Release the button, then open the
“Pairing” creates a link between			headset boom.
devices equipped with Bluetooth		The headset indicator remains on.
wireless technology and allows the
phone to remember your headset’s
Using Your Headset	15	16	Using Your Headset

Step	Pairing to Additional
	Devices
2 Perform a device discovery from
the phone.	Your headset can store pairing
For details on device discovery
	information for up to eight different
for your phone, refer to the
	devices that have Bluetooth wireless
phone’s user’s guide.
	technology. Devices are stored in a
When the scan is complete, the phone
	“Paired Device List” in memory in
displays the devices found.
	chronological order. When an attempt to
3 Select the Motorola HS850 from the	pair to more than eight devices is made,
discovered devices list and confirm	the oldest paired device is removed
following the on screen prompts.	from the list.
4 When prompted by the phone, enter	Any of the eight paired devices can
the passkey 0000 and confirm to pair	initiate a paired connection to your
the headset with the phone.
	headset.
The device ID is now stored in the
	Your headset will only automatically
phone’s memory.
	initiate a paired connection (by opening
Pairing is successful when the
	the boom) with the last device it was
headset indicator flashes 10 times
	connected to. If you want to connect
rapidly.
	your headset to another device in the

Using Your Headset 17

18Using Your Headset