OPERATION
CHOICE OF THE SIGNAL SOURCE AND MEASUREMENT
The most important keys on the MSK 200 are | and | . | ||
After activating the | key, you will be able to define the source and the channel or transponder to be | |||
measured. After pressing the | key, you will be able to choose the type of measurement wanted and | |||
have this carried out. In the MSK 200‘s display, the ANALYSE menu is always positioned at the edge of the display with the SOURCE menu positioned next to it. Both menus should be seen as being completely inde- pendant of each other, and be independantly operated.
CHOICE OF THE SIGNAL SOURCE
By pressing the hard key , you will be able to choose a signal source from the list displayed. The following sources can be chosen:
Digital Cable TV
Digital Satellite TV
Digital Terrestrial TV
Analogue Cable TV
Analogue Satellite TV
Analogue Terrestrial TV
Analogue Radio (FM / UKW)
Audio/Video or Transport stream Input
Note: Not all signal sources can be called up directly during a measurement operation. Due to this, we recommend that you call up the spectrum analyser before changing the signal source (see point 4, Measurement choice)
Provided you have already chosen a signal source, the corresponding Help file will be opened
once the 
key has been pressed.
13