BASE/CRADLE Mounting Plate

MOUNTING PLATE-TO-CRADLE RETAINER TAB

SWIVEL

ADJUSTMENT

KNOB (REF)

SWIVEL

ADJUSTMENT

KNOB

MOUNTING

BASE

ASSEMBLY

SCREW HOLES

(4) FOR DIRECT HARDMOUNTING

PLASTIC LINER

AND ADHESIVE

BACKING

NOTE: Allow a 72-hour period for the adhesive backing to cure completely.

3.Installing the Cradle Using Double-Sided Tape You can mount the cradle directly to your dashboard or other flat surface without using the cradle mount in the kit.

a.Remove the 3/4” x 3” double-sided tape from the supplied kit.

b.Determine the location of the cradle, and clean the mounting surface as before.

c.Peel the backing from one side of the tape, and press the tape in place on the rear or bottom cradle mounting plate.

d.Peel the backing from the exposed side of the tape and carefully position the cradle on the mounting surface, gently pressing the cradle into place.

-10-

128-7218

10 of 20