7.Mounting the Vehicle Antenna
The antenna should be placed on a relatively flat surface on the vehicle exterior, preferably on the roof (high point) or on the trunk (convertible). To mount the antenna:
a.Plug the antenna into the ANT connector on the back of the cradle.
b.Place the antenna at the preferred location on the roof or trunk surface. If the vehicle is equipped with a roof or trunk rack, the antenna may have to be mounted
c.Apply power to the XR9 system as outlined in the associated User Guide and obtain an audio output. If no audio is heard, first check the signal strength indicator located on the bottom left corner of the display to ensure the antenna is receiving an optimum signal. If necessary, move the antenna to different positions on the surface until an audio output is heard. The desired antenna position should be marked with masking tape or by another
XR9 
(TYPICAL)
ADAPTER
SAT ANTENNA (TYPICAL)
d.After determining the optimum position, turn off XR9 power, disconnect the power adapter from the vehicle cigarette lighter receptacle and disconnect the antenna cable.
128-7218
14 of 20