Using Other Manufacturer’s Mounts | XM Satellite Radio XC9 instruction

	REAR	CRADLE
		ASSEMBLY
	MOUNTING
		(REAR VIEW)
	PLATE

DC IN FM OUT AUX

AUDIO ANT

THREADED

HOLES (4)

4.Using Other Manufacturer’s Mounts

The XC9 Cradle can also be installed using other manufacturer’s mounts; the mounting plate provisions on the rear of the cradle

provide you with multiple mounting options within the vehicle using various vehicle-specific aftermarket brackets, such as those purchased separately from Panavise, Pro-Fit, etc.

NOTE: The cradle contains a rear mounting plate with four M4 x 7 threaded holes for attachment to the vehicle-specific after-market bracket. Four M4 x 8 Philips screws are supplied with the mounting base for this purpose.

5.Installing the XR9 into the Cradle Install the XR9 as follows:

a.Carefully line up the XR9 rear spine grooves with the cradle guide spines; slide the latch tab lever to the unlock ( ) position, and lower the XR9 into the cradle.

-11-

128-7218

11 of 20