Audiovox XMH-10A manual Positioning the XM Antenna

Page 12

Installation / Wiring Precautions

12

a. Positioning the XM Antenna

The antenna supplied with the Xpress XM Home Kit is a high gain type that can receive XM’s signal from one of XM’s satellites and/or, depending on where you live, XM’s terrestrial repeaters. It is recommended that the antenna be positioned near a south-facing window or outdoors with a clear view of the south eastern sky in order to receive the satellite signal. In some cases, it will be possible to receive XM’s signal through standard home walls or a roof. To position your antenna, first set up the home system as described earlier in this installation guide. Next, position the antenna until you receive the strongest possible satellite signal. If the satellite signal is not available, you can optimize it for a terrestrial signal (where available).

b. Indoor installation on a flat surface To aim your antenna at the satellite:

1.Set antenna flat against its base on a flat (horizontal) surface.

2.Turn the base of the antenna so that the XM logo is facing to the south if you are in the eastern half of the U.S. and to the south/southeast if you are in the western half.

3.Use the “Antenna Aiming” screen, as described on the previous page, to optimize antenna tilt angle and position.

4.If necessary, experiment with different locations near a south-facing window or outside.

Image 12
Contents Page Table of Contents Congratulations FCC Information Page Contents XMH-10A Installing/Positioning the Antenna Cabling InterconnectionsInterconnect Diagram Installing the Xpress In the Cradle Aiming your XM Home Antenna Installation / Wiring Precautions Positioning the XM Antenna Outdoor installation or indoor wall mounting Installation / Wiring Precautions Installation / Wiring Precautions Month Limited Warranty A. Audiovox Electronics CORPORATION, 150 Marcus Blvd 128-7476G