Delphi SA10085 manual If you see this on the display You should, No Signal

Page 27

If you see this on the display:	You should:

NO SIGNAL	The message should disappear as
Cause: The XM	soon as you move out of an
signal is being blocked.	obstructed area such as an indoor
	garage. If the problem persists,
	make sure your antenna is mounted
	outside and on top of your car with
	a clear view of the sky.

27

Section 6

ANTENNA

Cause: The antenna jack that plugs into your Roady2 has probably come loose.

Make sure antenna is correctly attached to the receiver and that antenna cable is undamaged and free from kinks. Turn the Roady2 off and back on to reset this message.

OFF AIR	Tune in to another channel.
Cause: The channel selected is not
currently broadcasting.

Image 27

Contents User FCC ID RS2SA10085 Welcome About Roady About DelphiAbout XM Contents Getting Started Activating Roady2 Roady2 Display Screen Roady2 ReceiverChannel name, channel number, artist name Basic Operations Turning Roady2 On and OffBasic Channel Selection Preview and select channels using the Tuning Wheel Save and Recall Artist Name and Song Title Information Changing the DisplayMenu FM Frequency only available when FM modulator is turned onScreen Color ContrastAudio Level TuneSelect Antenna AimingDirect Tune Stock TickerFactory Default Auto-OnAuto-Off Installation Roady2 Kit Set-upHooking up your Roady2 Receiver FM Modulator Wireless FM Modulator Direct ConnectCassette Adaptor Your Roady2 can be installed as follows Roady2 InstallationSection Attach car mount to back Removing swivel mount from your dashboardXM Antenna Set-up Antenna InstallationCable Routing Final installation Taking Care of Your Roady2 ReferenceTroubleshooting If you see this on the display You should No SignalIf this happens You should Contacting Product Technical Support and Customer Service Available AccessoriesTechnical Information XM Satellite Radio Limited Consumer Warranty How state law relates to the warranty How you the Customer can get service