Delphi Essential Guide to Radio Reset and Management Features

Page 16

16

Section 4

Auto-On

Once you have installed your Roady2 and the power has been turned on using the power button , you will discover your Roady2 has been factory- set to be turned off and back on again using the ignition key in your vehicle. To change this factory-set condition and always power your Roady2 on and off with the power button , select the “Auto-On” feature in the menu and then select “Off.”

Auto-Off

You can set your radio to automatically shut off 60, 120, or 180 minutes after it is turned on. This feature should be used if your vehicle continues to power the cigarette lighter/auxiliary power after you remove your key, so if you leave it on, Roady2 will shut down automatically after the time period you select and will not drain your battery. At home, this can be used as a “sleep” feature to turn Roady2 off automatically after a period of time.

Factory Default

This feature lets you restore your Roady2 to the same settings as when you purchased it. It will erase the presets, TuneSelect, memory, and stock ticker data stored and reset the other features to the configuration when you first purchased Roady2.

Warning: When using this product it is always important to keep your eyes on the road and your hands on the wheel. Not doing so could result in injury to you or to others or in property damage.

Image 16
Contents User FCC ID RS2SA10085 Welcome About Delphi About RoadyAbout XM Contents Getting Started Activating Roady2 Roady2 Receiver Roady2 Display ScreenChannel name, channel number, artist name Turning Roady2 On and Off Basic OperationsBasic Channel Selection Preview and select channels using the Tuning Wheel Changing the Display Save and Recall Artist Name and Song Title InformationFM Frequency only available when FM modulator is turned on MenuContrast Screen ColorAudio Level Antenna Aiming TuneSelectStock Ticker Direct TuneAuto-On Factory DefaultAuto-Off Roady2 Kit Set-up InstallationHooking up your Roady2 Receiver Direct Connect FM Modulator Wireless FM ModulatorCassette Adaptor Roady2 Installation Your Roady2 can be installed as followsSection Removing swivel mount from your dashboard Attach car mount to backAntenna Installation XM Antenna Set-upCable Routing Final installation Reference Taking Care of Your Roady2Troubleshooting No Signal If you see this on the display You shouldIf this happens You should Available Accessories Contacting Product Technical Support and Customer ServiceTechnical Information XM Satellite Radio Limited Consumer Warranty How you the Customer can get service How state law relates to the warranty