Hyundai H-CMDN6000 instruction manual Dolby digital setup, Preference setup

If the Screen saver is set On and the unit is switched on without a disc playing for 3 minutes, a moving picture appears on the TFT.

Dolby digital setup

￿￿DUAL MONO

Choose the mode of the audio output:

Stereo: choose this setting, when 5.1-channel sound playing, two channels of signals will be output from the left and right soundtrack; when 2-channel sound playing, stereo signal will be output.

L. Mono: the signal will be output from the left speaker.

R. Mono: the signal will be output from the right speaker.

Mix-mono:the signal from one channel will be output from left and right speakers.

￿￿DYNAMIC

If adjusting to FULL, the audio signal peak value will be the minimum. While adjusting to OFF - maximum. Use the ￿/￿ button to move the scroll and adjust the dynamic range.

Preference setup

￿￿TV TYPE

This unit is suitable for all kinds of TV systems. You can select one of the PAL,

NTSC or AUTO.

Auto: the TV system is auto switched according to the disc system.

NTSC: this system is used in USA, Taiwan, Japan etc.

PAL: this system is used in China, Europe, Hong Kong etc.

￿￿AUDIO, SUBTITLE, DISC MENU

32