30 Service Search
To use the USALS protocol, se- lect the Installation > USALS Setting menu. You should see a screen like the left figure.
At first you have to set the Mo- torized DiSEqC 1.3 option to En- able.
To get every satellite position calculate , perform the following steps:
1.Choose your desired satellite at the Satellite Name op- tion.
2.Select the tuner that is connected to the motorized an- tenna at the Tuner Select option.
3.Enter your location to the My Longitude option and the My Latitude option with the b, dand numeric buttons.
4.Enter the position of your selected satellite to the Satellite Angle option if it is not correct.
5.Select the Goto the position option; then the antenna will turn toward your selected satellite as calculating its position.
6.If the receiving quality, which is displayed at the bottom right of the screen, is not good, then tune the antenna finely with the Move option. The changed position is automatically saved. At this time you had better check the receiving quality of every transponder and choose the best one at the Transponder (or Frequency) option. It will be helpful to your fine tuning.