Listening to FM/AM
1 | 3 2 | 4 |
1Press the TUNER/AUX 1/2 button to select ‘TUNER’.
2Press the BAND button to select FM or AM.
3Press the TUNING MODE button to select the ‘Auto tune’ mode.
Each time the TUNING MODE button is pressed, the mode is changed as follows.
Manual tune
Auto tune
Preset tune
4Select the station you want to listen to (auto selection).
When a station is tuned in, the tuning process will stop automatically.
If you want to stop the tuning process, press the TUNING/PRESET/TIME button.
Selecting stations which cannot be tuned automatically (Manual tune)
Select ‘Manual tune’ in step 3 .
Repeatedly press the TUNING/PRESET/TIME button until the station you want to listen to is found. Or hold down the TUNING/PRESET/TIME button until the station you want to listen to is found and release the button.
FM: 50 kHz steps, AM: 9 kHz steps
<‘STEREO’ is displayed when a stereo broadcast is tuned in.
<‘TUNED’ is displayed when a broadcast is correctly tuned in.
FM MODE Button
Pressing this button alternates between Stereo mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the STEREO indicator lights in the display.
Mono
To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.
28