CD Player
Cannot play.
eLoad a disc with label side up.
eIf the disc is dirty, clean the surface of the disc. eA blank disc has been loaded. Load a prerecorded
disc.
eUnfinalized
Sound skips.
ePlace the unit on a stable place to avoid vibration and shock.
eIf the disc is dirty, clean the surface of the disc. eDon’t use scratched, damaged or warped discs.
No program playback.
eIn the stop mode press PROGRAM button to enter the program mode, and press play button to start playing.
If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use diluted neutral cleaning liquid. Be sure to remove any fluid completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit.
Beware of condensation
When the unit (or a disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, leave the unit for one or two hours with the power turned on. The unit will stabilize at the temperature of its surroundings.
39