XM Satellite Radio control (continued)
English
Select a category
To turn the category selection on
1 Select [Setup].
Preset memory
The channel being received can be stored manually under a selected number.
Select the channel, then touch and hold the number under which you wish to store the channel for at least 2 seconds.
10
The XM Setup screen is displayed.
2 Select [On] from “Category”.
Select [Off] to turn the category selection off.
To select a category
Select [] or [].
The category switches.
Note:
It is not possible to select a category if “Category” is set to [Off].
The channel being received is stored under the selected number.
Note:
6 channels can be stored for each channel list (XM1, XM2, and XM3). (18 channels in total)
Select [Band] to switch between channel lists.
The channel list switches as shown below each time [Band] is selected.
XM1 
XM2 
XM3
Select a stored channel
Select a channel (number) from the preset channels.
The channel switches to the selected channel.
10