Panasonic CN-NVD905U Receiving a call, Calling back, Hang up, Adjust volume, Set the ring tone

Receiving a call

1When a call is received, the Bluetooth hands free screen is displayed.

The telephone number of the calling party is displayed.

2Press [Hang-on] on the Bluetooth hands-free kit to answer the phone.

Speak towards the microphone of the Bluetooth hands-free kit.

Note:

Reception of a call when power is off does not turn on the power of this unit.

“CONNECT” is displayed when information of the calling party cannot be acquired.

Calling back

Calls can only be placed to the last number displayed on Receiving a call ( above).

1Press [Hang-on] on the hands-free kit.

The Bluetooth hands free screen is displayed.

2Check the number, then press [Hang-on] on the Bluetooth hands-free kit again.

Once the call is connected, speak towards the microphone of the Bluetooth hands-free kit.

Hang up

Press [Hang-up] on the Bluetooth hands-free kit while talking.

The call is ended and the screen returns to the original display.

	English
Adjust volume

It can adjust the hands-free ring and talk volume when a call is received. (The Bluetooth hands free screen is only displayed.)

Select the volume.

Minimum Middle Maximum

Note:

The speaker that outputs the hands-free talk can be set. ( Operating Instructions)

Set the ring tone

If the cellular phone has a “no in-band ringing” specification, it can be set to ring or not ring when a call is received.

Select [On] or [Off] from Ringing.

[On]: Rings.

[Off]: Does not ring.

Note:

If the cellular phone does not have the no in-band ringing specification, it is not possible to set to ring or not ring. (Touch keys are not displayed either.)

17

17