Panasonic TC-60AS640U owner manual First Time Setup, Turn the TV on with the Power button

First Time Setup

The first time setup screen is displayed only when the TV is turned on for the first time, after the power cord is inserted into a wall outlet.

1Turn the TV on with the POWER button

(TV)

or

(Remote)

2Setup the following items

●Select your language

●Select your country

●Select your viewing mode

(Be sure to select “Home Use”)

If you select “Store Demonstration” by mistake, confirmation screen will be displayed.

To display the “Set viewing mode” screen again in order to select “Home Use”, perform one of the following actions:

•Press and hold down the rear POWER button for at least five seconds.

•Unplug the power cord for 30 seconds and then plug it in again.

●Configure Network connection

Follow the instructions on screen to complete the Network connection.

●ANT/Cable setup

Set up based on how your TV programming is connected. Select “Yes” if you are connected to a Cable, Satellite or Fiber Optic box. Select “No” if you are connected to the Antenna/Cable In with a coaxial wire into the screw-on connector. In this case you will need to scan for channels that are available in your area.

●Adjust the Clock

Select the clock mode and adjust other settings.

When “Auto” is selected, clock will be set automatically according to Time zone and DST. The TV must be connected to the Internet to use this feature.

●Complete first time setup Completion screen is displayed.

3Select type of Home Screen

The “Tutorial” for “my Home Screen” starts.

Follow the instruction of the “Tutorial” to select desired “Home Screen”.

Example: Home Screen Selection

Example: Lifestyle Screen

•“Home Screen” is displayed as the start-up screen when the TV is turned on or the HOME button is pressed.

English 19