Touch Panel Operation Overview
English
11
❒Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel. (a page 47)
Operation
¡Use only your fingers to operate the touch panel. ¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any hard objects.
¡Do not use a pen or other sharp implements to operate the touch panel.
¡Do not bump the front panel.
a Failure to observe the above may damage or break the glass on the surface of the touch panel.
The State of Operation Screen
Example: DVD mode
Note:
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Aspect Button
(a page 36)
(only for video source)
Sound Button
(a page 37)
Source Button
(Content varies with each source)
Displays the Source Selection Screen.
Source Selection Screen
Source Selection Screen appears.
Touch desired source button.
Touch 
to quit.
Press [SOURCE]/[SRC] to change to desired mode.
Note:
Clock time
(a page 34)
Prohibition 
Input is not possible because the user has attempted to perform an operation which is not supported by the disc contents.
Disc indicator (a page 17) (Lights when a disc is loaded)
Setup Button
Displays the Setup Screen.
Setup Screen
Setup Screen appears. Select desired setting.
Setup menu, (a page 32)
¡The screen above appears when no external device is connected to this unit.
12