Panasonic CQ-VX220W manual RGB Input, ACC Select, OSD Color

Note:

¡Make sure to select Off when no rear view camera is connected.

¡The image from the rear view camera may be blurred in the night or a dark place.

RGB Input (RGB input selection)

RGB1/2 : Select one between RGB1 and RGB2 with which images are displayed most regularly when a car navigation system is connected via RGB connector.

default: RGB1

Other

Other settings
		(Setting ACC selection ON and
ACC Select
		OFF)
On	: sets to ON if your car has ACC position.
Off	: sets to OFF if your car has no ACC posi-
	tion.
		default:
			On
Note:

¡For an ACC-equipped car, select ON. The following functions are available.

¡The power is turned on automatically when inserting

adisc.

¡Off selection disables turning on the power of the

main unit through the remote control.

Caution

¡Be sure to select off when your car has no ACC position in the ignition switch. Failure to do this could cause the battery to go dead.

Security Alarm		(Security Alarm)
On	: activates the security alarm.
	(a page 31)
Off	: inactivates the security alarm.
		default:
			On

OSD Color		(OSD color setting)
Blue	: Blue-based screen
Green	: Green-based screen
Red	: Red-based screen

default: Blue

Memory Clear

Memory clearance

The state of all of the current memories are returned to default settings.

Note:

¡The ID code is not deleted by executing memory clear.

Yes : clears the memory to default settings

No : no memory clear.

The display returns to the previous one.

		Really?		appears when
			is selected.
		Yes
OK	: proceed.
Cancel	: no memory clear.

Note:

¡The power of this unit is turned off automatically after

OK is selected. (memory clearance completed). Please turn on the power again to using this unit.

Caution

¡Be aware that this setting restores the unit to default settings, so that all the memories and settings that you have set will be eliminated.

English

34

CQ-VX220W

35