Panasonic CQ-VD6503N operating instructions Beep, Security LED

Caution

¡Record your registered ID code and keep it in a secure location. (Fill in the ID code memo (a page 50).) If you forget it, you will be unable to use the unit. In case you forget the ID code, please consult your nearest Panasonic Service Centre.

MEMORY CLEAR

Memory clearance

The state of all of the current memories are returned to default settings.

Note:

¡The ID code is not deleted by executing memory clear.

NO : no memory clear.

The display returns to the previous one.

YES : clears the memory to default settings

		REALLY?		appears when
			is selected.
		YES
	: no memory clear.
CANCEL
	: proceed.
OK

Caution

¡Be aware that this setting restores the unit to default settings, so that all the memories and settings that you have set will be eliminated.

OTHER

Other settings

BEEP		(Beep setting)
OFF	: operation sound (beep) OFF
ON	: operation sound (beep) ON
		default:
			ON

ACC SELECT		(Setting ACC selection ON and
		OFF)
OFF	: set to OFF if your car has no ACC posi-
	tion.
ON	: set to ON if your car has ACC position.

default: OFF

Note:

¡For a ACC-equipped car, select ON. The following functions are available.

¡The power is turned on automatically when inserting a disc or magazine.

¡OFF selection disables turning on the power of the main unit through the remote control.

Caution

¡Be sure to select OFF when your car has no ACC position in the ignition switch. Failure to do this could cause the battery to go dead.

OFF

	ACC
	IGN
REMOTE CONTROL			(Remote control setting)
FRONT		: main unit-specific remote control
REAR		: rear monitor (option)-specific remote
		control
			default:
				FRONT
SECURITY LED			(Security LED setting)

OFF : LED indicator not blinking with ignition key being at out-of-ACC

ON : LED indicator blinking with ignition key being at out-of-ACC

default: ON

English

34

CQ-VD6503N

35