Clarion dxz738rmp owner manual Basic Operations

English

6. OPERATIONS

Basic Operations	Note: Be sure to read this chapter referring to the front diagrams of
	chapter “2. CONTROLS” on page 5 (unfold).

CAUTION

Be sure to lower the volume before switch- ing off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [FNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

∗The volume level is from 0 (minimum) to 33 (maxi- mum).

Switching the display

Press the [D] button to select the desired display.

Each time you press the [D] button, the display switches in the following order:

Main display ➜ Clock (CT) display ➜ Main display

∗Once selected, the preferred display becomes the display default. When a function adjust- ment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display sev- eral seconds after the adjustment.

∗For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.

∗When CT data is not received, “CT––:––” ap- pears in the display.

3.Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.

Note:

•System check

The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, “SYSTEM CHK” and “Push POWER” appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again.

Selecting a mode

1.Press the [FNC] button to change the opera- tion mode.

2.Each time you press the [FNC] button, the op- eration mode changes in the following order:

Radio mode ➜ DAB mode ➜ CD/MP3/WMA mode ➜ CD changer mode ➜ MD changer mode ➜ DVD changer mode ➜ TV mode ➜ AUX mode ➜ Radio mode...

∗External equipment not connected with CeNET is not displayed.

Adjusting the volume

Turning the [ROTARY] knob clockwise in- creases the volume; turning it counterclockwise decreases the volume.

Setting the Z-Enhancer Plus

This unit are provided with 4 types of sound tone ef- fects stored in memory. Select the one you prefer.

∗The factory default setting is “Z+ OFF”.

Each time you press the [Z+] button, the tone ef- fect changes in the following order:

“Z+ OFF” ➜ “B-BOOST” ➜ “IMPACT” ➜

“EXCITE” ➜ “CUSTOM” ➜ “Z+ OFF” ...

• B-BOOST	: bass emphasized
• IMPACT	: bass and treble empha-
	sized
• EXCITE	: bass and treble empha-
	sized mid de-emphasized
• CUSTOM	: user custom
• Z+ OFF	: no sound effect

Adjusting the Subwoofer

∗The factory default setting is “SW-VOL 0”

When you select one of the mode (LPF 50 Hz, LPF 80 Hz, LPF 120 Hz).

1.Press the [A-M] button, “SW-VOL 0” appears in the display.

2.Turn the [ROTARY] knob to select from –6 to +6.

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

12 DXZ738RMP